IFRS 16 has reshaped how property leases are accounted for, bringing them onto the balance sheet. This guide walks you through everything from scope assessment to remeasurements, helping you approach IFRS 16 property lease accounting with clarity, accuracy, and confidence.
Table of Contents
How to Approach Accounting for IFRS 16 Property Leases
When it comes to financial reporting, few changes have been as impactful as the introduction of IFRS 16 – Leases. For businesses with property or office space under lease, knowing how to approach accounting for IFRS 16 property leases is critical. This standard has transformed lease accounting from a largely off-balance-sheet exercise into one that directly shapes how assets, liabilities, and cash flows are presented.
Unlike the old IAS 17 standard, which allowed operating leases to remain out of sight, IFRS 16 brings nearly all leases, including property leases, onto the balance sheet. This means companies must now recognise both a right-of-use (ROU) asset and a corresponding lease liability for most property agreements, from head offices and distribution centres to rented retail outlets.
Understanding the steps involved – from identifying whether a contract qualifies under IFRS 16, to calculating the lease liability, and ensuring the correct disclosures – can feel overwhelming.
That’s why this guide breaks down each part of the process in practical terms. Whether you’re just beginning your IFRS 16 journey or refining your compliance processes, this blog will give you the confidence to handle property lease accounting effectively. This guide will focus on IFRS 16 from a property perspective, but for a full guide on IFRS 16 lease accounting, please refer to our blog – Ultimate IFRS 16 Lease Accounting Guide.
Let’s walk through what you need to know – from scope and classification, to recognition, initial measurement, remeasurement, and best practices – all tailored for property leases under IFRS 16.
Determining if IFRS 16 Applies to Your Lease
Before diving into the numbers, the first critical step is determining whether your lease contract falls within the scope of IFRS 16. While that might sound obvious for property leases, it’s not always as clear-cut as you’d think – especially when contracts contain bundled services, renewal options and embedded leases.
Embedded leases occur when a contract that’s not explicitly labelled as a lease still grants control over a specific asset, like an office unit, within a broader service agreement. IFRS 16 requires these lease components to be identified and accounted for separately, even if bundled with services like cleaning or maintenance.
Lease Contract Definition
According to IFRS 16, a lease exists if a contract “conveys the right to control the use of an identified asset for a period of time in exchange for consideration.” In practical terms, if you’re leasing a specific building, floor, or office unit and you have the right to direct its use and derive the economic benefits from it – then yes, you’re likely within scope.
To help simplify this decision-making process, we recommend asking three key questions:
- Is there an identifiable asset? (e.g. “Unit 5, 3rd Floor, 21 Business Street”)
- Do you have the right to control the use of the asset? (Can you decide how and when to use it?)
- Does the lessor retain any substitution rights? (Can they swap the space out for another unit without your approval?)
If the answer to the first two is “yes,” and the third is “no,” you’re almost certainly dealing with an IFRS 16 lease. For a more detailed walkthrough, see our Lease Identification Flowchart to help clarify whether your agreement meets the IFRS 16 lease definition.
Once the scope is confirmed, the next step is initial measurement – specifically calculating the lease liability and the right-of-use asset, which we’ll cover in the next section.
How to Calculate Lease Liabilities and ROU Assets in Property Contracts
Once you’ve confirmed that your property lease falls under IFRS 16, the next step is initial recognition – bringing the lease onto your balance sheet. This means recording two new items: a lease liability, representing your obligation to make lease payments, and a right-of-use (ROU) asset, representing your right to use the property.
Lease Liability
Under IFRS 16, the lease liability is calculated as the present value of future lease payments, discounted using the appropriate rate. For property leases, this often includes:
- Fixed payments (e.g. monthly rent)
- Variable payments linked to an index (e.g. CPI increases)
- Expected payments under residual value guarantees
- Purchase option payments (if reasonably certain to be exercised)
When it comes to the discount rate, IFRS 16 allows you to use either the interest rate implicit in the lease, or the lessee’s incremental borrowing rate (IBR). The IBR is far more common to be used, especially in property agreements where the implicit rate is rarely disclosed. Knowing how to discount the payments with the right discount rate is an important consideration, which you read more about in our blog – The Different Ways To Calculate Your Lease Liability.
It’s important to note that variable lease payments based on revenue or performance metrics (such as turnover rent in retail property leases) are excluded from the lease liability calculation. This is because these payments do not depend on an index or rate and are instead tied to the lessee’s future activity – which is inherently uncertain.
Instead, these amounts are recognised as an expense in the period in which the event or condition that triggers the payment occurs. For example, if a tenant pays 5% of store turnover as rent, this would not be included in the initial lease liability but would be expensed as incurred.
Right-of-Use Asset
The ROU asset is initially measured at an amount equal to the lease liability, adjusted for:
- Lease payments made before the commencement date (e.g., Leasehold improvements)
- Any initial direct costs (e.g. legal fees, broker commissions)
- Lease incentives received (which reduce the asset value)
Once recognised, this asset will be depreciated over the lease term. Keep in mind that in practice, it is very common to assess if there is any indicator of impairment for the ROU Asset. A helpful guide to consider for this is Navigating Impairments (IAS 36) within IFRS 16
Bringing a property lease onto the balance sheet in this way can significantly affect your liquidity ratios, EBITDA, and financial position – a major reason why IFRS 16 has been so impactful. But with a structured approach to measurement and tools that automate these calculations, compliance doesn’t have to be complex. At Rubli, our platform is built to simplify IFRS 16 lease accounting, from reassessments to reporting, so you can stay compliant with confidence and clarity. In the next section, we’ll walk through example journal entries to put all of this into action.
Accounting Entries Explained: Property Leases Under IFRS 16
Once your lease liability and right-of-use (ROU) asset are calculated, the next step is to reflect these in your accounting records. Under IFRS 16, property lease journal entries follow a consistent pattern – from initial recognition through monthly activity.
Here’s a summary of the most common journal entries:
| Timing | Journal Entry | Purpose |
| At Commencement | Dr Right-of-use Asset Cr Lease Liability |
To bring the lease on the balance sheet |
| Monthly Depreciation | Dr Depreciation Expense Cr Accumulated Depreciation – ROU Asset |
To reduce the ROU asset over the lease term |
| Monthly Interest | Dr Interest Expense Cr Lease Liability |
To accrue interest on the lease liability |
| When Rent is Paid | Dr Lease Liability Cr Bank (or Cash) |
To reduce the lease liability with each payment |
Special Considerations for Property Leases
Property leases often include CPI-linked escalations, lease term extensions, or mid-term changes in usage, all of which may trigger lease remeasurements. Specifically considering the CPI-linked escalations, the conclusion that IFRS 16 arrived at is the fact that CPI is too hard to predict, especially over long periods – which is why the CPI impact on the payments are ignored at commencement of the lease. These changes require updated calculations and journal entries, which we’ll cover in the next section.
Remeasuring Lease Liabilities: Property Modifications in Practice
In the real world, property leases are rarely static. A business might renew its lease, downsize its office space, or agree to a rent adjustment due to a CPI escalation or renegotiation. Under IFRS 16, these changes often require lease remeasurement or modification accounting.
Failing to remeasure a lease correctly can lead to misstatements, which is why this part of the standard is so crucial.
Common Triggers for Remeasurement or Modification
| Trigger Event | Example |
| Extension or reduction in lease term | Renewing a lease for 3 more years |
| Change in expected use of options | Management is now expecting to exercise a purchase or break clause |
| Rent change due to CPI or market adjustment | Annual CPI-based rent increase of 6% |
| Floor space expansion or reduction | Taking on an extra floor or reducing a part of the property lease |
| Change in discount rate (in specific scenarios) | If linked to floating interest rates |
How to Recalculate the Lease Liability
Once a triggering event occurs, on that day (the Effective Date):
- Reassess the lease term and lease payments.
- Determine the appropriate discount rate.
- Use the original rate if the change is due to CPI or index adjustments.
- Use an updated Incremental Borrowing Rate if it’s a significant contract change (like extending the lease).
- Calculate the new present value of the revised payments.
- Adjust the lease liability accordingly.
- Make a corresponding adjustment to the right-of-use asset.
For a deeper explanation of how to apply discount rates and remeasure lease liabilities under IFRS 16, refer to Rubli’s training materials on IFRS 16 lease modifications and remeasurements, which includes paragraph references and real-world scenarios.
Journal Entry Scenarios
| Scenario | Journal Entry |
| Lease liability increases | Dr Right-of-use Asset Cr Lease Liability |
| Lease liability decreases (by more than the value of the ROU asset carrying value) | Dr Lease Liability Cr ROU Asset Cost Cr Gain on Lease Modification (P&L) |
Property Example
Scenario: You lease a warehouse for 5 years, with the option to extend for another 3 years. Initially, you don’t expect to extend. In year 4, you decide to exercise the option. Under IFRS 16, you must remeasure the lease in Year 4, adding the 3 extra years of payments and updating the lease liability and ROU asset.
When Can You Skip Capitalising a Property Lease? IFRS 16 Exemptions
While IFRS 16 brings nearly all leases onto the balance sheet, it does allow exemptions for leases that are either short in duration or low in value. These simplified accounting treatments are appealing – but when it comes to property leases, it usually is only applicable for short-term property leases.
Short-Term Lease Exemption
Under IFRS 16, a short-term lease is one that:
- Has a lease term of 12 months or less
- Does not include a purchase option
In practice, this might apply to:
- Temporary office rentals
- Pop-up retail locations
If a lease qualifies, the lessee can ‘bypass’ balance sheet recognition and instead expense lease payments on a straight-line basis over the lease term.
Applying these exemptions can reduce administrative burden, but they must be consistently applied and disclosed. You’ll still need to report any outstanding lease commitments in the notes to the financial statements.
For more on this topic, see our breakdown of exemptions and real-world scenarios in the Ultimate IFRS 16 Guide. Next, we’ll cover what disclosures are required in your annual report for property leases under IFRS 16.
Disclosure Requirements for IFRS 16 Property Leases
Recognising your property leases on the balance sheet is only part of the story. IFRS 16 also sets out a range of disclosure requirements designed to help users of financial statements understand the nature, timing, and uncertainty of your lease obligations, particularly for long-term property leases.
If you’re leasing office buildings, warehouses, retail space or industrial facilities, clear and consistent disclosure is essential for transparency.
Key Disclosures for Property Leases
Here are the core disclosure areas you’ll need to include in your annual financial statements:
| Disclosure Requirement | What to Include |
| Breakdown of Lease Liabilities | Maturity analysis showing undiscounted lease payments over time |
| ROU Asset Movements | Opening and closing balances, additions, depreciation, impairments, and remeasurements |
| Lease Expense Types | Short-term, low-value, and variable lease expenses (if applicable) |
| Interest Expense | Amount of interest recognised on lease liabilities |
| Practical Expedients Applied | Any exemptions used (e.g. low-value or short-term leases) |
| Qualitative Disclosures | Nature of leasing activities, extension/termination options |
Real-World Application for Property Leases
Because property leases are typically material, these disclosures often appear in dedicated lease accounting notes. Many businesses also include narrative context -such as lease renewal strategies or location-specific risks – to support investor understanding.
If your property lease terms include CPI-linked increases, options to extend, or modification clauses, you’ll also need to disclose how these affect your liability measurement and assumptions.
A Quick Tip
When presenting your lease maturity analysis, group the undiscounted payments into categories like:
Within 1 year
1–2 years
2–5 years
Over 5 years
This gives stakeholders a clear view of future obligations tied to your property footprint.
Rubli’s IFRS 16 software auto-generates these disclosures, including tables, narratives, reducing risk and saving significant time during audit prep. For a preview of how this might look in excel, we have prepared a free workbook to download in the following link – IFRS 16 Training: Presentation and Disclosure
In the next section, we’ll explore how these accounting and disclosure requirements impact key financial metrics, including EBITDA, leverage ratios, and the statement of cash flows.
Financial Statement Impacts of IFRS 16 Property Leases
IFRS 16 not only changes how you record leases — it reshapes your financial statements. For companies with property leases, the effects can be substantial, influencing ratios, KPIs, debt covenants, and even investor perception.
Let’s break down how IFRS 16 impacts each of the three core financial statements when it comes to property leases.
1. Balance Sheet Impact
With IFRS 16, you now record:
- A Right-of-Use (ROU) Asset under non-current assets
- A Lease Liability, split between current and non-current liabilities
This increases both sides of the balance sheet, often inflating total assets and liabilities – especially for long-term leases with significant rent payments.
Effect on Key Ratios:
| Ratio | Impact |
| Debt-to-Equity | Increases (due to higher liabilities) |
| Return on Assets | Decreases (due to a larger asset base) |
| Current Ratio | May decrease (as most lease liabilities has a short-term portion) |
2. Income Statement Impact
Under IFRS 16, you no longer recognise lease payments as a single “rent” expense. They are now separated into two elements:
- Depreciation on the ROU asset
- Interest expense on the lease liability
This results in front-loaded expenses (higher early on), especially for property leases with long terms. It can also improve EBITDA, since interest and depreciation fall below the EBITDA line.
Before vs After Comparison:
| Line Item | Before (IAS 17) | After (IFRS 16) |
| Operating Expenses | Includes full lease payment | Lower (only exempt lease and variable lease payments) |
| EBITDA | Lower | Higher (no rent expense above the line) |
| Depreciation & Interest | Not affected | Increases significantly |
3. Cash Flow Statement Impact
IFRS 16 reclassifies lease payments:
- Principal repayments → Financing activities
- Interest portion → Operating activities
- Short-term/low-value leases → Still in operating activities
Previously, full rent was classified as an operating cash outflow – so this shift improves operating cash flow, while increasing financing outflows.
Strategic Takeaway
If you’re not prepared, these changes can:
- Trigger breaches of loan covenants (due to altered debt ratios)
- Mislead performance indicators as EBITDA jumps artificially
- Require additional explanation to auditors, investors, and boards
That’s why it’s vital to communicate the impact clearly and consider how lease decisions (e.g. leasing vs. buying a property) align with your financial strategy.
Next, we’ll cover best practices for managing property leases under IFRS 16, especially as your portfolio grows.
Best Practices to Streamline Your Property Lease Workflow
Once you’ve implemented IFRS 16 for your property leases, the real work begins –ongoing compliance, accuracy, and efficiency. Managing a property lease portfolio under IFRS 16 requires more than just an initial setup; it’s about putting in place repeatable, auditable, and scalable processes.
Here are some best practices to help your team stay ahead.
1. Centralise Lease Data and Documentation
Teams often store lease agreements, addendums, CPI clauses, and renewal terms across emails, departments, and hard drives. Centralising these into a single source of truth, ideally within lease accounting software, makes updates, audits, and disclosures significantly easier.
2. Apply Consistent Discount Rates Where Appropriate
IFRS 16 allows you to use portfolio discount rates for similar classes of assets. This reduces complexity and helps maintain consistency, but ensure the grouping is justified and documented.
3. Stay on Top of Modifications and Remeasurements
Property leases are dynamic. Whether it’s a change in rental terms, CPI adjustments, or renegotiation of space, these events usually require remeasurement. Having a clear internal process to flag and evaluate changes is essential.
4. Audit-Proof Your Lease Accounting
Make sure every figure is traceable to its source. Auditors review journal entries alongside the supporting details (payment schedules, assumptions, and contracts) to verify accuracy and compliance. This is where spreadsheets often fall short.
A robust lease accounting solution like Rubli’s lease accounting software can provide automated audit trails, version tracking, and reporting history -essential for clean audits and stress-free year-ends.
5. Use IFRS 16 Software That Fits Your Needs
As your lease portfolio grows, manual tracking becomes a risk. Purpose-built IFRS 16 tools save time, improve accuracy, and generate ready-to-use disclosures.
When selecting software, look for:
- Bulk upload
- Journal entry automation
- Modifications and remeasurements workflows
- Customisable reports and audit logs
Need help evaluating options? See our blog: 13 Things to Consider When Searching for IFRS 16 Software.
Final Thoughts: Navigating Lease Compliance with Confidence
Accounting for property leases under IFRS 16 may seem like a heavy lift, and in many ways, it is. From calculating lease liabilities and managing remeasurements, to disclosing the right information and understanding the financial impacts, this standard demands a structured, detail-oriented approach.
But with the right tools and processes, you can turn lease compliance into a strategic advantage.
Whether you manage a handful of office leases or a complex property portfolio across regions, adopting best practices and the right software allows your finance team to:
- Eliminate manual errors
- Automate monthly journals and remeasurements
- Ensure complete audit readiness
- Generate disclosure-ready reports in minutes
At Rubli, we’ve helped businesses across industries simplify their IFRS 16 compliance with software designed specifically for lease accounting and support from experts.
Ready to Simplify Your IFRS 16 Compliance?
If you’re looking to streamline how you handle IFRS 16 property leases, we’re here to help.
Get in touch with us today for a personalised walkthrough or to see how Rubli’s platform can save you time and stress.
